arrange
New, copy, paste and remove patterns
In arrange, adds a pattern to the selected track, copies the current pattern with its whole sound, pastes it and removes a pattern; a track holds up to 16.
The OP-XY has changed since TE’s guide was written; this page follows the device.
The four module keys are the pattern toolbox of arrange: new, copy, paste and remove, always acting on the selected track. A copy carries the full sound, so paste within a track for variations, or onto another track to change a part's instrument mid-song. Editing the notes inside a pattern is a sequencer topic.
How to
Add a pattern to a track
before you start arrange mode
- 1 select the track
- 2
The track gains one more pattern, up to 16.
Copy a pattern to the same or another track
before you start arrange mode · the pattern to copy is selected
- 1 copy
- 2 optional, pick another track
- 3 paste
Remove a pattern from a track
before you start arrange mode · the pattern is selected
- 1 labelled clear while the track has one pattern, delete once it has more
Empty a track's only pattern
before you start arrange mode · the track has one pattern
- 1 select the track
- 2 about a second, until clearing shows
The pattern is empty and keeps its bars and track scale.
Details
- TE’s guide
adds a new pattern to the selected track, the one whose key is lit.
- TE’s changelog
OS 1.1.15 raised the limit from 9 to 16 patterns per track; older TE texts still give 9.
- TE’s guide
copies the selected pattern together with its engine and all other settings.
- TE’s guide
pastes the copy. Pasted onto another track, it brings the complete instrument, engine and parameters included.
- TE’s guide
removes a pattern from the selected track.
- checked on a unit · 1.1.33
On the device the arrange footer reads new, copy, paste and then clear or delete from left to right, so adds a pattern as the guide says; TE's screen art, which shows the order reversed, is wrong.
- checked on a unit · 1.1.33
is labelled clear while the track has only one pattern and delete once it has more.
- community
While reads clear, it acts only once held for about a second; the screen then says clearing and the pattern empties (a tutorial on OS 1.0.40 or older).
- community
Clearing a pattern in arrange empties it but keeps its bars and track scale, so the next take fills the same length (the same tutorial).
- community
Changing pattern while playing, to one at a different track scale, takes up the step the old pattern was on and then runs at the new scale, rather than working the step out from the transport count (one video, narrated, OS 1.0.x). Patterns at the same scale change as before.
- TE’s changelog
Since OS 1.1.25, a newly added pattern takes over the player type currently in use.