mix
Mix mode
Mix mode sets each track's level, pan and FX sends on and runs the master chain — EQ on , saturator on , group levels, compressor and output level on .
Mix mode has four pages: is the channel strip of the selected track, and … work on the master — EQ, saturator, then group levels, compressor and output. Tracks reach the mixer directly and through their sends; the sum then runs through the master chain to the output. Levels and pans travel with each pattern and scenes keep the mutes, so a balance change can be part of the arrangement.
How to
Open mix mode
- 1
Switch mix between instrument and auxiliary tracks
before you start mix mode
- 1
Details
- TE’s guide
Mix mode is where you balance the project — levels, pans and FX sends per track, plus EQ and compression on the master.
- TE’s guide
Pressing while already in mix mode flips between the instrument tracks and the auxiliary tracks; both can be mixed.
- TE’s guide
A track key selects the track to adjust; instrument tracks light white and auxiliary tracks red.
- community
A track's level and pan belong to the pattern it plays, as part of that pattern's sound, while each scene keeps the mutes; so a scene changes the balance by switching patterns or mutes. TE's guide puts the levels in the scene; tutorial videos on OS 1.0.x show them following the pattern.
- TE’s guide
After the mixer, the summed signal passes through the EQ, then the saturator, then the compressor and limiter, and on to the main output.
- TE’s guide
A voice reaches the mixer directly and through its sends to the aux out, tape, FX I and FX II tracks, which feed the mixer as well.
- TE’s guide
In TE's signal flow diagram each send track can also feed the next one down — aux out into tape, tape into FX I, FX I into FX II — and no arrow runs back up, so FX II returns only to the mixer.
- community
Opening mix while an auxiliary track is selected shows the instrument tracks first; press mix again to reach the auxiliary tracks (a narrated video, OS 1.0.13).