auxiliary
Aux routing, filter and LFO pages
Pages shared by several aux tracks — routes instrument tracks in, is a high-pass and low-pass filter with sends on its shift layer, and is an LFO aimed at one of the track's own parameters.
These pages behave alike on every aux track that has them. The filter trims the lows and highs of what the track outputs, keeping a reverb return clean; the LFO moves one of the track's own settings.
Details
- TE’s guide
The brain, external audio, tape and both FX tracks have a routing page on .
- TE’s guide
On a routing page, an encoder click toggles the page between tracks 1–4 and tracks 5–8; turning a track's encoder adds or removes it, and on tape and external audio sets how much goes in.
- TE’s guide
External audio, tape and both FX tracks have the filter on ; those four plus external MIDI have the LFO on .
- TE’s changelog
OS 1.1.32 fixed aux track LFOs failing to affect the page parameters.
- community
Community charts put the aux sends on CC37–39 of the track's channel.
- checked on a unit · 1.1.33
Over MIDI, CC32 and CC35 move the external audio track's high-pass and low-pass and CC40–43 its LFO; the external MIDI track's LFO answers CC40–43 too.
- checked on a unit · 1.1.33
On external audio the filter starts switched off; its high-pass is drawn rising from the left and its low-pass falling from the right.
- community
On the tape track the M3 filter, the FX I and FX II sends and the M4 LFO act on the sound, and the LFO can aim at pitch, speed or mix (two videos, OS 1.x).
Parameters
| parameter | gesture | range | cc |
|---|---|---|---|
| high-pass cutoff M3 | – | 32 | |
| low-pass cutoff M3 | – | 35 | |
| tape send M3 | – | – | |
| FX I send M3 | – | – | |
| FX II send M3 | – | – | |
| LFO speed M4 | – | – | |
| LFO amount M4 | – | – | |
| destination M4 | – | – | |
| parameter M4 | – | – |