recipes
A squelchy acid bass
On the bass track pick the ladder filter, set a low cutoff, high resonance and a strong, short filter envelope, then play mode legato with a little portamento so that overlapping notes slide.
Acid lives in the filter: a bright snap at the start of each note that closes almost at once, with resonance singing at the cutoff. Program the line with some notes overlapping so they slide (a note slides into the next only when it lasts past the next one's start; written end to end they only touch, and the next starts anew), and a few locked accents where the filter opens further. Riding the cutoff live while the pattern loops is half the fun.
How to
Give the bass on a squelchy filter
before you start instrument mode
- 1 the filter types
- 2 highlight ladder
- 3 takes it and goes back to
- 4 press it again if the page shows off
- 5 cutoff around 20
- 6 resonance around 70
- 7 envelope amount around 70
Snap the filter shut and let the notes slide
- 1 click an encoder until the filter envelope is in front
- 2 filter decay around 25
- 3 filter sustain 0
- 4 play mode legato
- 5 portamento around 20
Details
- checked on a unit · 1.1.33
Picking a filter type from takes you back to , so press to go on with the filter.
- worked out
A low cutoff, high resonance and a large envelope amount with a short filter decay make each note open and snap shut, the acid squelch.
- worked out
In legato play mode one note sounds at a time, and portamento makes overlapping notes glide from one pitch to the next.
- worked out
Parameter locks on the cutoff or the envelope amount for single steps give the line its accents.