sequencer
Bend (step component)
Step component on that runs one of ten pitch-bend curves over a step.
A small pitch envelope for one step: dips, falling kicks, chirps on percussion.
How to
Give a step a dip-and-return bend
- 1
Details
- TE’s guide
Bend runs a pitch-bend curve over the step; the black key chooses the shape.
- TE’s guide
1 down-up, 2 up-down, 3 bump down, 4 bump up, 5 spring out, 6 spring in, 7 fade down, 8 fade up, 9 random 1, 0 random 2.
- unconfirmed
The depth may follow the track's bend range ( shift page), in which case bend range off would silence the effect. Not confirmed.
- community
Each curve peaks at about half the bend range, not the full range (a swarm line with bend range 2, OS 1.x, read from the pitch). Down up starts about 100 cents down and is back by 57 percent of the note, and up down is its mirror; bump down and bump up dip or rise about 95 cents around 75 percent of the note; spring out swings up first over two cycles that fade (about +87, −83, +66, −59 cents) and spring in is the same growing; fade down is a straight line to about −85 cents at the end. Random 1 and 2 are single sightings, scaled the same.