effects
Delay effect
An echo for FX I or FX II; sets the repeat spacing as a note value, fine-tunes it, and sets the feedback and the amount of dry signal.
Set the rough echo distance with size, then fine-tune it and choose how long the echoes keep coming back. Dry at 99, as a new project has it, is the classic send; at 0 the echoes replace the sound. TE's guide calls the middle controls amount and fine and describes size as eight named steps from micro to insane; on 1.1.33 the screen reads fine and feedback, and size shows note values, so the spacing follows the tempo.
Details
- TE’s guide
The delay plays back what it receives as a series of echoes.
- checked on a unit · 1.1.33
Size () sets the spacing of the repeats and reads as a note value, such as 1/8 dotted.
- checked on a unit · 1.1.33
The delay's columns read size, fine, feedback and dry — fine-tunes the spacing and sets the feedback.
- TE’s guide
Dry () sets the untreated signal against the echoes; at 0 only the repeats are heard.
- worked out
A new project keeps dry at 99, where each sending track keeps its own sound and the echoes come on top, as a send. Turned down, more of what a track sends is heard only through the delay, and at 0 a track sending at 99 is heard as repeats alone. The replica plays it this way; how the unit mixes in between is not yet measured.
- community
The repeats sit in the centre of the stereo field, not bouncing left and right, and keep their bass; each repeat is about 4.4 dB quieter than the one before at feedback 50 (one video, measured at 95 BPM, OS 1.1.x).
- TE’s changelog
Since OS 1.1.25 the delay stays steady when the tempo of an external clock wobbles.
Parameters
| parameter | gesture | range | cc |
|---|---|---|---|
| size M1 | note values, e.g. 1/8 dotted | 12 | |
| fine M1 | – | 13 | |
| feedback M1 | – | 14 | |
| dry M1 | – | 15 |