op-xy agent desktop only
the agent writes a song, track by track, and the replica plays it

made for a desktop browser

OP-XY Agent is a replica of the OP-XY you can play, and an AI agent that teaches the instrument and programs it for you. It needs a big screen, a computer keyboard and a USB port, so it won’t work on a phone. Please open it in a desktop browser.

op-xy agent

mix

Levels, pans and sends

On mix the four encoders set the selected track's FX I send, FX II send, pan and level; clicking centres the pan and clicking mutes the track.

The page is a channel strip for the selected track: two send amounts, pan and level. The sends decide how much of the track reaches the two FX tracks, so one reverb can serve the whole project.

How to

Set a track's level

  1. 1
  2. 2 select the track
  3. 3

Put a track back in the centre of the stereo field

before you start mix mode · · the track is selected

  1. 1

Details

  • in mix mode is the page for levels, pans and sends; a track key chooses which track the encoders adjust.

    TE’s guide
  • Over MIDI, CC7 sets a track's level and CC10 its pan, each on the track's own channel (1–16).

    TE’s guide
  • On an instrument track's channel, CC38 and CC39 set its FX I and FX II sends — presumably the same values this page shows.

    community
  • Instrument tracks repeat these sends on their shift layer, whose rows run aux out, tape, FX I, FX II from the top — FX I on , FX II on . TE's drawing of that page puts FX II above FX I; the device does not.

    checked on a unit · 1.1.33
  • The page draws eight columns, one per track, each with its number, a level line and a pan dot along the bottom; CC7 and CC10 sent over MIDI move them as they arrive.

    checked on a unit · 1.1.33
  • Turning or briefly swaps the selected track's column for two boxed labels, I and II, each with a dark bar rising to its send level; after about a second the column comes back.

    checked on a unit · 1.1.33
  • Sending CC38 changes a track's FX I send without calling up that I and II display.

    checked on a unit · 1.1.33
  • Holding several track keys on this page edits those tracks together. A turn of an encoder moves every held instrument track by the same amount, each clamped at its own limit. The strips left out lose their bars, which fall to the foot, and their numbers and dots, and the held strips show theirs (three videos, OS 1.0.x and 1.1.x).

    community
  • A muted strip draws its bar in grey and its lines in a second grey. A video on OS 1.0.13 showed no lines at all on the lightest strip, a single sighting.

    community

Parameters

parametergesturerangecc
FX I send M1––
FX II send M1––
pan M1–10
centre pan M1––
level M1–7
mute M1––

Our wording, for OS 1.1.33. TE’s page source

no device
os –
view simulated