connectivity
Multi-out jack modes
The 3.5 mm multi-out sends MIDI, CV and gate, a sync pulse (sync8, sync16, sync24) or audio; the mode is chosen with on the com page while nothing is plugged in.
Pick the job first, then plug in. The jack only sends — MIDI comes in through the MIDI in jack, USB or bluetooth. TE does not say which gear sync16 is meant for; the output levels are listed with the specifications.
How to
Choose what the multi-out sends
before you start no cable is plugged into the multi-out
- 1
Details
- TE’s guide
The multi-out has six modes: midi, cv/gate, audio and three sync rates (sync8, sync16, sync24).
- TE’s guide
The mode is chosen on the com page by turning .
- TE’s guide
The mode cannot change while a cable is in the jack, so set it before connecting.
- TE’s guide
In midi mode the jack is a MIDI output; a type A TRS-to-DIN cable reaches synths with DIN MIDI sockets, played from the external MIDI track () or a midi-engine track.
- TE’s guide
In cv/gate mode the tip carries pitch CV and the ring the gate, played from the external CV track () for synths with CV and gate inputs.
- TE’s guide
The sync modes send a clock pulse while the OP-XY plays — sync8, an eighth-note pulse, suits pocket operators and sync24 suits DIN-sync drum machines.
- TE’s guide
In audio mode the jack is an auxiliary audio output, fed by the external audio track's routing and the tracks' aux sends.
Parameters
| parameter | gesture | range | cc |
|---|---|---|---|
| multi-out mode com | midi / cv/gate / sync8 / sync16 / sync24 / audio | – |